Upgrades
As of 2/1/2019, we’ve added an optional heavy duty torque limiter gear as well as the rubber boot that is shown in the photos on this page. You’ll find both on the DIY/Parts page.
Annually
- Grease the screw assembly through the zerk on the side of the cylinder.
- Remove the gearcase cover. Wipe out existing grease and any water that has condensed inside. Replace with low temperature lithium grease.
- Add a dab of grease inside the brass bushing on the gearcase cover.
- Reinstall cover, cleanup, and you’re ready for another year!
